RTTY
[Top] [All Lists]

Re: [RTTY] n1mm/KAM plux

To: "Mark A. Downing" <mdowning@wm7d.net>,"Scott Schultz" <scottaschultz@juno.com>
Subject: Re: [RTTY] n1mm/KAM plux
From: "sjolin" <sjolin@swbell.net>
Date: Fri, 9 Feb 2007 15:46:20 -0600
List-post: <mailto:rtty@contesting.com>
In case I do get time to break away from work this weekend and can 
participate a little in the WPX, I guess I would like to toss this question 
out.  I will be using WL or N1MM with my KAM Plus. I'm using a different 
laptop now. The old 386 machine that I used to use with WF1B is way too slow 
today. Takes more than a second to key the rig. Now I'm using an IBM 
ThinkPad 380. Still old but at least its a Pentium chip.

Question, am I likely to have any problems getting the KAM to talk with the 
Thinkpad. I used to have to use KAM software to initialize the Kam or at 
least that is what I remember. I don't know what speed the connection was 
between the KAM and the old laptop.  With the newer ThinkPad will it be plug 
and play? Can I get them talking just by setting parameters in Write or 
N1MM. I've had Write log now for over a year and I've never used it. Guess 
the old drive isn't there any more.

I do have soundcard interface (again never hooked up) but I think the best 
odds of getting on this weekend for a run on Sunday afternoon would be with 
the KAM. Any thoughts.

73 de Dave, N0IT
Missouri


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>