Tad,
If you are going to do FSK with the microKEYER, you will need
to use the MMTTY plug-in with WriteLog. There is a timing issue
between Writelog's FSK and the virtual port software library used
to build microHAM Router. It looks like the problem will be
resolved in the updated software library that is being used for
Router with Vista support expected to be ready later this summer.
However, for the time being, use the MMTTY plug-in or use AFSK.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of Tad Danley
> Sent: Sunday, June 03, 2007 7:43 PM
> To: rtty@contesting.com
> Subject: [RTTY] getting started
>
>
> After many years - and one false start - I would like to get
> back into
> rtty contesting. I have started to look around at the AA5AU and
> rttycontesting web sites and have a couple of questions
> before I go on.
> I'll be running an IC-756Pro2, with a microKEYER and WriteLog
> on an xp
> machine. I want to run FSK.
>
> To get started, should I run the rtty program that comes with
> WriteLog,
> or use MMTTY instead?
>
> For 'sound card FSK' mode I assume the rig sends the rx audio
> to the pc
> sound card and terminal software for decoding via the microKEYER, and
> the terminal software sends FSK commands to the rig via the
> microKEYER
> for transmitting. Do I understand that correctly? Also, I think the
> Pro2 should be in RTTY mode, right?
>
> Thanks in advance and 73,
>
> --
> Tad Danley, K3TD
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|