I suggest you use {ENTER} rather than {ENTERLF}.
Enter should put you on a new line. Enterlf will probably skip two lines.
There are 24 more keys you can use for Macros in the Digital Interface
Window.
If you are new to N1MM, remember the first 12 regular macros are for Run
mode and the second 12 S & P.
73, Tom, W1TO
----- Original Message -----
From: "John Klim, N3KHK" <n3khk_john@verizon.net>
To: "'Andrei Stchislenok'" <asnp3d@gmail.com>; "'RTTY Reflector Reflector'"
<RTTY@contesting.com>
Sent: Thursday, November 08, 2007 9:41 PM
Subject: Re: [RTTY] N1MM for WAE (QTC)? Help!
> Andrei.
>
> This is my first WAE RTTY.
>
> QTC, you press CTRL-Z once fro receive and CTRL-Z again to transmit QTCs.
> Below is the macro I will be using.
>
> 73 ES CUL
>
> F1 RUN,{TX}{ENTERLF}CQ WAEDC DE * * K{ENTERLF}{RX}
> F2 EXCH,{TX}{ENTERLF}! {NAME} 599 {EXCH} {EXCH} DE * K{ENTERLF}{RX}
> F3 TU,{TX}{ENTERLF}! QSL TU * CQ K{ENTERLF}{RX}{LOG}{WAIT}{RUN}
> F4 MyCall3,{TX}{ENTERLF}* * * K{ENTERLF}{RX}
> F5 -, -
> F6 B4,{TX}{ENTERLF}! QSO B4 DE * K{ENTERLF}{RX}
> F7 RPT ALL,{TX}{ENTERLF}! ALL AGN DE * K{ENTERLF}{RX}
> F8 QRZ,{TX}{ENTERLF}QRZ QRZ DE * K{ENTERLF}{RX}
> F9 NR,{TX}{ENTERLF}! NR AGN NR AGN DE * K{ENTERLF}{RX}
> F10 -,-
> F11 -,-
> F12 -,-
> F1 S&P,{TX}{ENTERLF}! DE * * * K{ENTERLF}{RX}
> F2 EXCH3,{TX}{ENTERLF}! {NAME} QSL {EXCH} {EXCH} {EXCH} DE *
> K{ENTERLF}{RX}
> F3 EXCH5,{TX}{ENTERLF}! {NAME} 599 {EXCH} {EXCH} {EXCH} {EXCH} {EXCH} DE *
> K{ENTERLF}{RX}
> F4 MyCall3,{TX}{ENTERLF}! DE * * * K{ENTERLF}{RX}
> F5 MyCall5,{TX}{ENTERLF}! DE * * * * * K{ENTERLF}{RX}
> F6 -, -
> F7 -, -
> F8 RPT ALL,{TX}{ENTERLF}! ALL AGN ALL AGN DE * K{ENTERLF}{RX}
> F9 NR,{TX}{ENTERLF}! # # DE * K{ENTERLF}{RX}
> F10 -,-
> F11 -,-
> F12 -,-
>
> ========================================================
> Mr. John R. Klim II
> N3KHK
> ARRL LM-0008416263, AMSAT LM-2187, QRPARCI #10392, FISTS # 5015,
> MQFD
> #115,
> 10-X Life Member # 68135, Springbok Chapter # 1874, Chesapeake Bay
> Chapter # 549
>
>
>
> -----Original Message-----
> From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
> Behalf Of Andrei Stchislenok
> Sent: Thursday, November 08, 2007 8:39 PM
> To: RTTY Reflector Reflector
> Subject: [RTTY] N1MM for WAE (QTC)? Help!
>
> Hello folks,
> I will be using N1MM in WAE RTTY this weekend. Never used it for WAE
> before.
> Can someone help me, how to make up macros, and how to send/receive QTC
> using N1MM?
>
> THank you in advance.
>
> Good luck in the Contest!
>
> --
> 73's Andrei
> EW1AR-NP3D
> WAS RTTY #455 (all via LoTW)
> ----------------------------------------------------
> DXCC RTTY via LoTW only
> Who has what? - World Wide Rating
> Please visit: www.k4fo.com/cqrtty/
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|