RTTY
[Top] [All Lists]

Re: [RTTY] [dxlab] OT: WD-1A wire for antennas

To: "Pstark" <pstark@suddenlink.net>, <dxlab@yahoogroups.com>
Subject: Re: [RTTY] [dxlab] OT: WD-1A wire for antennas
From: g.m.mcadams@comcast.net
Date: Tue, 13 May 2008 22:56:14 +0000
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Lee,

I've been using WD-1 wire for antennas for the last two decades. The US Army 
used to toss it out, and I'd scoop it up.

Good stuff... Three strands of stainless steel and five strands of tin-plated 
copper. Incredibly strong, and with the black UV-proof insulation it lasts 
forever.

My current antenna is an 80 meter dipole made of it, fed with ladder line. 
Works FB!

I'd say use it!

73 Gary


 -------------- Original message ----------------------
From: "Pstark" <pstark@suddenlink.net>
> I worked with it in the Army.
> Roll it out, roll it up.
> Repeat.
> Steel strands and copper strands.
> A pain.
> Personally, I would pass on it.
> 
> Pete K4OM
> 
> -----Original Message-----
> From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
> lratcliff@isp.com
> Sent: Tuesday, May 13, 2008 5:51 AM
> To: dxlab@yahoogroups.com
> Cc: RTTY@contesting.com
> Subject: [dxlab] OT: WD-1A wire for antennas
> 
> 
> I have found some WD-1A field telephone wire for a decent price.  I was
> thinking of useing this to build a Windom.  From what I have read, it
> looks like a good strong wire.
> 
> My real question is has anyone here worked with the stuff?  Will the
> copper strands take solder?
> 
> Lee Ratcliff
> 
> KC4ART
> 
> 
> -----------------------------------------
> Join ISP.COM today - $9.95 internet , less than 1/2 the cost of AOL
> Try us out, http://www.isp.com/
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> <*> To visit your group on the web, go to:
>     http://groups.yahoo.com/group/dxlab/
> 
> <*> Your email settings:
>     Individual Email | Traditional
> 
> <*> To change settings online go to:
>     http://groups.yahoo.com/group/dxlab/join
>     (Yahoo! ID required)
> 
> <*> To change settings via email:
>     mailto:dxlab-digest@yahoogroups.com 
>     mailto:dxlab-fullfeatured@yahoogroups.com
> 
> <*> To unsubscribe from this group, send an email to:
>     dxlab-unsubscribe@yahoogroups.com
> 
> <*> Your use of Yahoo! Groups is subject to:
>     http://docs.yahoo.com/info/terms/
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [RTTY] [dxlab] OT: WD-1A wire for antennas, g . m . mcadams <=