I've emailed Buck a few times and have always received a prompt answer
to my question.
73, Mike K9MI
k0bx@arrl.net wrote:
> Well we always can get a broken one out of the box, but I have built or
> bought the ready made Rascals for years. At least 12 to 15 of them. They
> ALL WORKED. When there is a problem, it usually go's to a software problem.
> Either in MMTTY , PSK software or soundcard setup.
> There has been time with ICOM rigs that you can force the connector from the
> Rascal into the back of the ICOM upsidedown. Of course it will never work
> that way.
> If the led is blinking the usually it is the setup on the rig.
> The current Rascals that are factory built are really very good.
> Look at the results of the ARRL RTTY Roundup for 2008. Oprs AB0RX & K0BX
> 3rd place High Power Multi-Single.
> IC-756PROII and IC-775DSP with Rascals interfaces.
> Joe K0BX
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|