RTTY
[Top] [All Lists]

Re: [RTTY] RITTY setup in DOS

To: "Rick Mintz" <Rmintz@Rochester.rr.com>, W1TY@arrl.net
Subject: Re: [RTTY] RITTY setup in DOS
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
Reply-to: dezrat1242@yahoo.com
Date: Sat, 06 Mar 2010 16:24:16 -0800
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
ORIGINAL MESSAGE:

On Sat, 6 Mar 2010 17:10:02 -0500, "Rick Mintz"
<Rmintz@Rochester.rr.com> wrote:

>
>We are trying to install RITTY on a true blue DOS 6.2x machine (Pentium II). 
>It has a SoundBlaster 16 bit card.
>
>We know that either CONFIG.SYS or AUTOEXEC.BAT requires a SET= statement for 
>the soundcard. Can anyone check their DOS computer and tell us the parameters 
>of the SET= statement?
>
>Please reply direct so I don't miss it.
>
>W1TY@arrl.net 
>
>Thanks
>
>Rick

REPLY:

I am replying both direct and to the reflector in case anyone else
needs the information.

Here is my entire AUTOEXEC.bat file:

@ECHO OFF
CLS
PATH=C:\;C:\DOS;
rem USE THE FOLLOWING FOR CT-1740
SET BLASTER=A220 I5 D1 H5 P300 T6
rem USE THE FOLLOWING FOR CT-1790
rem SET BLASTER=A220 I5 D1 H6 P300 T6
rem USE THE FOLLOWING FOR EXPERIMENTS
rem SET BLASTER=A220 I5 D1 H6 P300 T5
SET DIRCMD=/O/P
DOSKEY
PROMPT $p$g
RITTY
DIR RITTY.TXT
PAUSE
CD\
CLS

I assume you know what all that means, but if not let me know and I
will be glad to explain. 

73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>