RTTY
[Top] [All Lists]

Re: [RTTY] MMTTY and EXTFSK at 75 baud...

To: Robert Chudek - K0RC <k0rc@citlink.net>
Subject: Re: [RTTY] MMTTY and EXTFSK at 75 baud...
From: James Colville <jimw7ry@gmail.com>
Date: Sat, 5 Jun 2010 18:29:30 -0700
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Sounds like the contest is a bust then.... If MMTTY wont work.


MMTTY is the most used RTTY program.

73
Jim W7RY



On Sat, Jun 5, 2010 at 9:04 AM, Robert Chudek - K0RC <k0rc@citlink.net>wrote:

> This is a FYI message...
>
> Operators planning to participate in the 75 Baud contests this weekend and
> next should be aware IF they are using the popular EXTFSK driver, this
> driver is hard coded to transmit at 45.45 Baud. Typically this driver is
> used to generate FSK & PTT keying (not AFSK) by RTTY software, MMTTY in
> particular.
>
> Dave Bernstein, AA6YQ, verified this (documented) limitation. He maintains
> the MMTTY source code.
>
> How do you know whether you are using the EXTFSK driver? Bring up your
> software configured for a RTTY contest. Look at the bottom of the screen to
> see if there is an EXTFSK 1.05 button displayed on the Windows task bar. If
> it is shown, you are using the driver and will only be able to transmit at
> 45.45 Baud.
>
> There are many other RTTY packages that will allow 75 Baud TX speeds. If
> you were planning to participate in high speed RTTY, it would be a good time
> to investigate other options if you are currently using the EXTFSK driver.
>
> 73 de Bob - KØRC in MN
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>



-- 
73
Jim W7RY
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>