WriteLog DOES transmit FSK and AFSK 75 Baud RTTY using the MMTTY plug-in for
WriteLog.
However, it doesn't work as you normally think it would. In my testing, I
brought up my normal RTTY setup using the MMTTY plug-in
at 45 baud. I then attempted to change the baud rate by going to the "Mode"
menu in Rttyrite and selecting "75 baud (100 WPM)
Baudot". When I transmitted, the rate remained at 45 baud.
In order to change from 45 to 75 baud transmission, I had to go to the "Option"
menu in the MMTTY RTTY Control panel and select
"Setup(O)". In Setup, I had to go to the Decode tab and change BaudRate to 75.
I was then able to transmit 75 baud RTTY using WriteLog and the MMTTY plug-in
to WriteLog. This worked with my simple transistor
FSK interface and my microHAM microKEYER.
I working on a web page on this subject. I will announce it when it's finished.
73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|