[RTTY] setup

["Quentin Falkenbury" <flknbry@srt.com>]

Hi All
I am using mmtty and a signallink usb and a kenwood ts-120s.I have most 
everthing working but i am unsure how to adjust my tx audio as there are 
basically 4 different adjustments.Now i have the mixer control set as 
tigertronics 
recommended.However you can also adjust the tx in mmtty and the usb interface 
and of coarse the mic gain on the radio.When i used a kam i just left the alc 
on ,set the mic gain at about 10 oclock and apparently all was ok.
                thanks quentin
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty