| To: | RTTY Reflector <rtty@contesting.com> |
|---|---|
| Subject: | Re: [RTTY] RTTY Digest, Vol 102, Issue 5 |
| From: | Kok Chen <chen@mac.com> |
| Date: | Sun, 05 Jun 2011 17:01:22 -0700 |
| List-post: | <rtty@contesting.com">mailto:rtty@contesting.com> |
On Jun 5, 2011, at 4:50 PM, Kok Chen wrote: > > 300 baud with a 170 Hz shift is a higher baud/shift ratio even than what is > used in MSK (Minimal Shift Keying). Whoops, sorry. 300 baud at 170 Hz shift is *lower* than the MSK limit. An MSK signal that looks like 170 Hz shift would have a baud rate of 340. 73 Chen, W7AY _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [RTTY] RTTY Digest, Vol 102, Issue 5, Kok Chen |
|---|---|
| Next by Date: | [RTTY] 300 baud RTTY, Ktfrog007 |
| Previous by Thread: | Re: [RTTY] RTTY Digest, Vol 102, Issue 5, Kok Chen |
| Next by Thread: | [RTTY] 300 baud RTTY, Ktfrog007 |
| Indexes: | [Date] [Thread] [Top] [All Lists] |