RTTY
[Top] [All Lists]

Re: [RTTY] We Need Some Activity

To: "'RTTY Reflector'" <rtty@contesting.com>
Subject: Re: [RTTY] We Need Some Activity
From: "Gary AL9A" <al9a@mtaonline.net>
Date: Thu, 15 Sep 2011 22:03:30 -0800
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Oops, ignore my previous post of a few minutes ago.  Found a problem - 
setting "57 Baud (75 WPM) Baudot: in RittyRite causes MMTTY to change it's 
baud setting down to 56.92!  That ain't goin' to work!  I changed MMTTY back 
to 75 baud and then on RittyRite went back to "75 Baud (100 WPM) Baudot" and 
again it printed garbage.  This time I went to TU type and changed from 
MMTTY to Sound Board FSK which switched out of MMTTY and into the WriteLog 
sound board mode.  I then immediately switched back to TU type MMTTY and 
this has fixed the problem.  I can now decode 75 baud correctly and both 
MMTTY and the RittyRite Mode settings are at 75 Baud (actually 74.2 in 
MMTTY, but close enough for government work!) :)  Sorry for the confusion 
and bandwidth.

73,
Gary AL9A

----- Original Message ----- 
From: "Gary AL9A" <al9a@mtaonline.net>
To: "'RTTY Reflector'" <rtty@contesting.com>
Cc: "Writelog" <writelog@contesting.com>
Sent: September 15, 2011 9:50 PM
Subject: Re: [RTTY] We Need Some Activity


> Just a heads up for those setting up WriteLog and the MMTTY plug-in for 75
> baud.  I went to Don's site and followed the directions there about 
> changing
> the Setup in MMTTY for 75 baud.  I then went to the RittyRite window in
> WriteLog and changed the Mode to "75 baud (100 WPM) Baudot".  When I sent 
> a
> practice transmission to my dummy load the diddles sounded like 75 baud, 
> but
> the printing on my RittyRite screen was always garbled and indecipherable.
> I tried closing and restarting MMTTY and RittyRite to no avail.  I finally
> found that changing the RittyRite Mode setting to "57 baud (75 WPM) 
> Baudot"
> would correctly print the practice transmission correctly.  I've run the
> BARTG 75 Sprint before, but don't remember having to change the Mode 
> setting
> like this in WriteLog, but then I don't remember a lot of things these 
> days!
> Since it seems to work I hope to be printing a lot of you this weekend.
>
> 73,
> Gary AL9A
>
>
> ----- Original Message ----- 
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: "'Hank Garretson'" <w6sx@arrl.net>; "'RTTY Reflector'"
> <rtty@contesting.com>
> Sent: September 10, 2011 9:05 AM
> Subject: Re: [RTTY] We Need Some Activity
>
>
>> This is also good practice for the BARTG Sprint75 coming up next weekend.
>>
>> Information on how to set up the MMTTY plug-in for WriteLog to run 75 
>> RTTY
>> can be found here:
>>
>> http://www.rttycontesting.com/75baudrtty/75baudrtty.html
>>
>> Unfortunately with the A at 24 and the K at 3, I'm not hearing much of
>> anything on HF today and no 75 baud RTTY signals yet.
>>
>> I'm going to start calling CQ TEST at 75 baud test and see what 
>> happens...
>>
>> 73, Don AA5AU
>> http://www.aa5au.com
>> http://www.rttycontesting.com
>>
>> -----Original Message-----
>> From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
>> Behalf Of Hank Garretson
>> Sent: Saturday, September 10, 2011 10:17 AM
>> To: RTTY Reflector
>> Subject: [RTTY] We Need Some Activity
>>
>> We need some activity for this one. It's 75 baud. Everyone works 
>> everyone.
>> 1500Z today until 1000Z Sunday.
>>
>> N1MM users Select Contest Type RFC-DIGI.
>>
>> Get on and have some fun. 75 baud is a blast.
>>
>> 73,
>>
>> Hank, W6SX
>>
>>
>> ---------- Forwarded message ----------
>> From: RW4WZ <rw4wz@udm.net>
>> Date: Wed, Sep 7, 2011 at 9:12 AM
>> Subject: [CQ-Contest] FW: DIGI CUP OF RUSSIA OPEN Contest
>> To: cq-contest@contesting.com
>>
>>
>> -----Original Message-----
>> From: mixw@yahoogroups.com [mailto:mixw@yahoogroups.com] On Behalf Of
>> w8vko
>> Sent: Wednesday, September 07, 2011 10:19 AM
>> To: mixw@yahoogroups.com
>> Subject: [mixw] DIGI CUP OF RUSSIA OPEN Contest
>>
>> Just a reminder of the upcoming Digi Cup Contest this weekend September
>> 10th and 11th. Information and rules for the contest can be
>> found at:
>>
>> http://drcg.de/index.php?option=com_extcalendar&extmode=view&extid=105
>>
>> As usual Victor R3BB has done a brilliant job of providing a dll and an
>> icon field which allows the user to choose between RTTY75
>> and BPSK63 (the two modes needed for the contest) which can be found at:
>>
>> http://www.digitalrus.ru/Files/StatsKubokSRR.zip
>>
>> As instructed: put the contents in the PLUGINS directory.
>>
>> The contest is divided into two four hour periods so there is plenty of
>> time to get some "sleep o' nights"
>>
>> I hope to see you all in the contest - the more the merrier!!!
>>
>> 73,
>>
>> Larry
>>
>>
>>
>>
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest@contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty 

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>