No audio is getting to the MMTTY decoder. Check the audio input cable to
the sound card, check the mic/line in isn't muted in Windows, check the
correct soundcard is selected in MMTTY.
73 de Bob - KØRC in MN
------------------------------------------------------------------------
On 9/23/2011 10:55 PM, allan1@dejazzd.com wrote:
> I am using the Icom 756 PRO 111 with built-in FSK along with MMTTY which I
> have been using together for a few years. This morning when I tried RTTY the
> two X-Y graphs were not normal. Normally I would see a bell curve, but
> instead it is showing straight noise about 5 mm above the base line even when
> I tune in a station which the PRO 3 is decoding. Again, normally when a
> station is tuned in there are two perpendicular ellipses in the box adjacent
> to the X-Y graph. Now I get what looks like a star burst (small) which
> doesn't change when I tune in a station.
>
> Anyone have any thoughts on how to fix this-would be very much appreciated.
>
> Thanks
>
> 73 Allan W2TN
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|