Sorry about having to resend. It must be one of those days. I used the wrong
address.
On Sep 26, 2011, at 11:53 AM, Dick Kriss wrote:
>
> Rig & Stuff: TS-590S, 60 watts, 3-Ele Beam, Mac OSX 10.7.1 (Lion) to
> fldigi-3.22.0AT and fldigi-3.21.15 that was released toward the end of the
> contest and worked FB. All QSO's have been uploaded to LoTW and I am still
> trying appease the CQ Robot with my aa5vu.log file. The CQ Robot says there
> is something wrong with my format
>
> QSO: 14094 RY 2011-09-24 0151 AA5VU 599 04 TX P49X 599
> 09
>
> that looks correct to me.
I did not recognize the problem listed CQ Robot's Message saying
I do not recognize '' as a valid QTH.
[X] QSO: 14112 RY 2011-09-24 0034 AA5VU 599 04 TX PZ5RA
599 09
until I received ww-rttya response from Susan, K5DU, pointing out "...In my
cabrillo file each DX contact has the letters DX in the column where other QSOs
have the state." I then used a text editor to added a "DX" after each zone and
the robot came back with a note saying my log has been accepted with
Confirmation number.Thanks to K5DU!
This was not a fldigi error. I caused the problem by reading the rules about
the DX exchange and only set up the macro to log the RST + Zone as the
exchange. It never entered my mine to add a "0' or "DX" at the end of the
statement.
73 Dick AA5VU
There are no new rules. Just old rules some of us fail to remember and have to
revisit
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|