RTTY
[Top] [All Lists]

Re: [RTTY] ZK2V on 40-meters

To: "rtty@contesting.com" <rtty@contesting.com>
Subject: Re: [RTTY] ZK2V on 40-meters
From: Don AA5AU <aa5au@bellsouth.net>
Reply-to: Don AA5AU <aa5au@bellsouth.net>
Date: Wed, 14 Dec 2011 07:49:51 -0800 (PST)
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
That's a great catch!  Never underestimate a vertical on 40 meters at night.  I 
remember in a JARTS contest a l-o-n-g time ago (1993) a few hours before 
sunrise, I found VK9XG in the contest with a huge JA pileup.  I was running an 
old SB-200 with 300 watts on RTTY and an HF6VX vertical.  I didn't think I had 
a shot in breaking the pileup but decided to call anyway.  He came right back 
to me on the first call.  It was my first ever VK9X on any mode.

Then there was the time I was calling CQ in the middle of the afternoon on 40 
meters and a VK6 came back to me (presumably longpath).  40 meters has always 
been my favorite band and the only band, up until recently with LoTW, that I 
chased DXCC on.  Sometimes you never know where your signal is being received.

73, Don AA5AU



>________________________________
> From: "RLVZ@aol.com" <RLVZ@aol.com>
>To: rtty@contesting.com 
>Sent: Wednesday, December 14, 2011 12:06 AM
>Subject: [RTTY] ZK2V on 40-meters
> 
>Hi Guys,
>
>I was missing RTTY, so I called CQ DX tonight a few times on 7043khz at 
>0600Z... and was thrilled when ZK2V called me.  That's a new one for me on 
>40-m.  If you need ZK2V on 40-m. you might try calling CQ around 0600Z.  
>Another 
>amazing thing is that I was only running 100 watts into a Vertical.  (air 
>cooled dummy load as some people call them)  ZK2V has very good ears!
>
>73,
>
>Dick- K9OM
>Edgewater, FL
>_______________________________________________
>RTTY mailing list
>RTTY@contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>