I've tried CLRRX the last few contests, but after ARRL RU, and my first "real"
SO2R effort, I don't think I'll use it again....if you swap focus before the
other radio stops sending, it clears the wrong window....
On 1/16/2012 10:17:33 PM, Ed Muns (ed@w0yk.com) wrote:
> If {CLRRX} merely scrolled the information off the top of the screen
> leaving
> the cursor in the upper left, that would be great. I sometimes need to
> scroll back for information. But, truly clearing the window, I can
> assure
> you I
> don't like it. ;>)
>
> Ed - W0YK
>
>
>
> > On 1/16/2012 4:07 PM, Dick Flanagan wrote:
> > > Writelog scrolls down (not up) so you don't
> have to chase
> > call signs.
> > > The call sign stays in one place until the window fills and
> > starts to
> > > fill from the top again.
> > > *It is too bad that N1MM
> doesn't have that feature.*
>
> Bill, W6WRT, wrote:
> > Actually, N1MM does have that feature and has had it for a long time.
> > It's
> just implemented differently.
> >
> > All you have to do is place the command {CLRRX} at the end of
> > your macro and the RX screen is cleared and the cursor placed
> > at the top left, ready to print onto a fresh new screen. If
> > you want to clear the screen after the macro executes instead
> > of immediately, just place the command {END} in front of {CLRRX}.
> >
> > I actually prefer it to
> WriteLog's implementation because you
> > know the start of print is always at the top%2
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|