Hi Guys,
I've only been operating RTTY for about 3 years now and I've still have a
lot to learn. I'd appreciate your tips for getting my CPU to operate
reasonably fast with RTTY as I've tried several different Windows XP and
Windows
7 computers and they'll all operate RTTY fast for awhile... and then
they'll slow down.
Such as, in today's BARTG 75: I'd be decoding and transmitting at an
excellent rate and then after a few minutes, my CPU would lock up while
decoding
and not print for about 10 seconds after his transmission ended. Very
frustrating! Again, this problem is not new but has happened with 5 different
CPU's I've tried over the past 2 years. (4 Windows XP machines and now my
new Windows 7)
By the way, I'm running N1MM and MMTTY.
I've tried different radios and different serial cables... but the same
problem over and over: CPU decodes great for awhile and then "locks up" and
prints the information about 10 seconds after it's sent.
All ideas appreciated!
Thanks-
Dick- K9OM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|