Hi Jim,
I think it can depend on how many USB root hubs you have on the main board.
You can give it a try with one connected to the front and the other
connected to the back side USB connectors.
Most of the times those will be separately connected to different
controllers on the board.
73, Elmar PD3EM
On 24-1-2013 21:53, Jim Harris wrote:
Hi folks,
Has any one had any success using two radio's (such as SO2R) via their USB
ports connected to a computer? I have a FTdx3000 and TS-590, both of which
have USB ports. As best I can determine they both use the same USB driver. I
have been unable to use both via their USB ports when trying to operate SO2R.
Either works fine alone in a contest.
It appears when I try to install the driver for the second radio and connect
the USB cable and select the hardware port that the first driver installation
disappears, leaving only the newer driver installation. In order to work SO2R
I have to use the RS-232 port on one of the radio's with an audio interface to
exchange audio between the radio and computer. CAT and audio on the other
radio works fine through it's USB port.
If anyone has any experience or helpful ideas in getting both USB connections
working, I would be interested in hearing from you.
My thanks in advance. 73
Jim, W0EM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2639/5554 - Release Date: 01/24/13
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|