RTTY
[Top] [All Lists]

Re: [RTTY] Foster 8 pin to RJ45 (Yaesu Adapter Cable)

To: rtty@contesting.com
Subject: Re: [RTTY] Foster 8 pin to RJ45 (Yaesu Adapter Cable)
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Tue, 02 Apr 2013 15:16:02 -0400
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>

If you are intending to use this with a microHAM interface, be
aware that the connection is not the same as those in the Yaesu
cable designed for using the desk mics with an FT-817/857/897
or FT-900.  The microHAM cable is "straight through" with all
signal assignments performed with jumpers in the appropriate
DB37 connector/cable.

73,

   ... Joe, W4TV


On 4/2/2013 11:57 AM, KC4HW/Jim wrote:
In need of one of these.

Please reply direct to me.

Jim/KC4HW

PS:  Guess I could make one, but thought I would try here first.


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>