Only one other station reported double printing characters with 13.09b. It's a
mystery to me.
Thanks to all who responded.
Man, fun contest, eh?
73, Don AA5AU
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Don AA5AU
Sent: Monday, September 30, 2013 9:55 AM
To: rtty reflector
Subject: [RTTY] Double-printing characters in 2Tone 13.09b
I read Gary's post about his problems with 2Tone V13.09b but I experienced a
different sort of issue.
I used 2Tone V13.09b in my main decode window extensively for the first time
with WriteLog this weekend. About 40-50 times, I got
double printed characters on my screen. As an example, my callsign sometimes
came in as AAA5AU but it didn't just happen on my
callsign, it happened on other callsigns. It seems to me it only happened on
callsigns and it was always at the start of the
callsign, but I'm not 100% sure of that. It could have happened to the report
as well but I don't recall that happening. I only
remember it happening at the start of callsigns, like PP49X, etc.
I also had 2Tone versions 13.04 and 13.02 running in receive-only windows with
no such problems.
Did anyone else notice this behavior? If so, were you running WriteLog or N1MM?
Thanks,
Don AA5AU
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|