On Oct 3, 2013, at 11:00 AM, rtty-request@contesting.com wrote:
>>
>> That is RSID from either Ham Radio Deluxe or perhaps FLdigi
>
> Yes ... The programmers of both HRD and Fldigi should disable RSID
> in RTTY mode. It's not needed, not readable by most software and
> certainly not compatible with FSK and since it's wider than the RTTY
> signal causes unnecessary QRM!
>
> 73,
>
> ... Joe, W4TV
The default setting for fldigi from the programmer, W1HKJ, for TxID is OFF and
even if someone happens to click on the RxID button in RTTY mode, it is
disabled in RTTY. The programmer designed it correct. The fldigi operator can
change the settings to transmit an TxID and it would become a QRM generator.
The TxID is useful and used in some of the digital modes but is disabled for
RTTY and PSK-31.
By mistake from a previous test at the start of the contest, I had fldigi's
RxID checked and it would detect a digital signal and change modes on me. As
soon as I realized what was going on I clicked RxID OFF and fldigi remained in
RTTY mode for the rest of the contest.
When you hear a TxID on a fldigi RTTY signal, it is an operator error - not a
programmer error. As a Mac user I know nothing about HRD and will not until it
runs under OS X. Maybe some HRD operators can comment on HRD default settings
for RxID and TxID.
Dick AA5VU
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|