When you are in N1MM, in MMTTY-options, in the TX tab is there a comport
selected under PTT&FSK?
On Nov 9, 2013, at 10:58 AM, Richard Zalewski <dick.w7zr@gmail.com> wrote:
> MMTTY TROUBLESHOOTING
>
> Went to get on WAE RTTY and MMTTY stand alone and MMTTY in N1MM does not
> work. Receives fine. Single tone only on transmit.
>
>
>
>
>
> 1. Was working perfectly when last used in CQWW RTTY
>
> 2. Rig- TS990
>
> 3. FSK from ACC2 to Rigblaster Plus
>
> 4.. Using Edgeport USB to Serial- checks out OK
>
> 5. FSK works using radio alone
>
> 6. Grounding FSK line from ACC2 changes tone
>
> 7. Rigblaster keys on transmit (single tone)
>
> 8. Device manager in Win 7 shows no problems
>
> 9. No diddle when keyed
>
> 10. N1MM and Rigblaster work fine for SSB
>
> 11. If an option for transmit other than the Soundblaster card is selected
> diddle is hears but reports are no tones on transmit
>
> --
> Tnx es 73
> Richard W7ZR
> www.w7zr.com
>
> *Be joyful in hope, patient in affliction, faithful in prayer*
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|