Sometimes I want to monitor RTTY while I am operating JT65/9 on my K3
(sn7901) which has the sub-rx. The only way I have figured out to do
this is to set both vfo A and B with [A>B] to data sub-mode AFSK A (LSB)
for RTTY, and then switch vfo A to DATA A (USB) for JT. If at anytime I
try to use the [B Set] function, to change band width for example, the
AFSK A (LSB) mode in vfo B changes to DATA A (USB). If I use the A/B
function both vfos become set to the sub-mode that was originally
selected for vfo A.
Setting split mode this way seems rather cumbersome, just as is the
inability to use [Freq Ent] with [B Set]. Am I missing something, or is
this just the way things are, and something to suggest for future software.
Dave, K2YG
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|