I used a USB-to-serial adapter on my laptop for many years. Combined with a
W3YY interface, the cost seems reasonable.
http://w3yy.com/fsk.htm
Or you can "roll your own", which I do. Simple FSK transistor interface here:
http://aa5au.com/rttyinterface.html
73, Don AA5AU
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of William G. Lisk
Sent: Saturday, June 07, 2014 2:46 PM
To: rtty@contesting.com
Subject: [RTTY] RTTY equipment configuration question
I am investigating RTTY for the first time and am seeking advice regarding
equipment configuration.
I have an Icom IC-7000 and an IC-7100 and was looking at ways to use them for
RTTY. Each has an RTTY mode. Using that mode with true FSK seems preferable,
because it takes advantage of the filters built into these radios for RTTY and
narrows the passband to minimize noise and interference.
The problem is the apparent lack of a good way to use a modern PC in this
configuration. Users report best results with a PC’s RS232 serial port. Most
modern PCs (like my laptop) don’t have them. And most USB to serial adapters
are reported by users as not working well for 45 baud TTY. The Timewave and
Rigblaster interfaces cost hundreds of dollars and are overkill for my
application. I just need the capabilities of a dumb terminal, PTT, and ideally
be able to have a log file of any QSOs.
Thanks for any suggestions.
Bill
KC2EMH
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4592 / Virus Database: 3955/7631 - Release Date: 06/06/14
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|