Hello,
I changed the software architecture of the DCS (Digital-Cluster-System).
Partly changed to a AR-Cluster system (many thanks for the support).
Telnet: dl4rck.ham-radio-op.net Port:8000 (as usual)
The Digital-Cluster DCS combined now all digital spots from all
RTTYSkimmerServer at RBN, all RCKskimmer direct on DCS connected and all
user inputs on any DX-cluster.
Only CQ-spots of RTTY and PSK are distributed.
New user-filters are possible. But the standard filter will send out only
CQ-RTTY/PSK-spots. Filter changes are remained on the cluster.
Useful digital-filters are:
Set Dx Filter comment=*RTTY* or comment=*PSK* -> Only RTTY/PSK spots
(standard)
Set Dx Filter comment=*RTTY* -> Only RTTY spots
Set Dx Filter comment=*PSK* -> Only PSK spots
Set DX Filter Not Skimmer -> No skimmer spots
Set Dx Filter -> Turns on all spots including skimmer
and CW
SH Filter -> show your current filter setup
Feel free to use it first time on the upcoming weekend in the TMC-RTTY
Contest. If it is working OK I will not shut down the system end of the
year.
Feedback are welcome.
73 de Walter, DL4RCK
Walter Dallmeier
www.dl4rck.de
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|