Hello Bostjan
In earlier versions of n1mm there was the capability of either selecting "First
One Wins" or "Last One Wins" for TX control. I can't find it in the version
that I have, and the default is "Last One Wins" which I prefer to use anyway.
For years I have used the last one wins feature for my operation and I prefer
doing it this way anyway.
I have my system setup for ESM control and right-click enabled so I can
right-click in either DI window to control transmission. For example, if I am
sending CQ (contents of the F1 macro) on both radios I right-click in one DI
window and when it has finished sending I right-click in the other DI window.
If I receive a call in one DI window, left-clicking on it places the call in
the Entry window. Then I right-click in that DI window and the software
immediately terminates transmitting CQ from the other DI window and sends the
contents of F5 and F2 to that station. Then while receiving the confirmation
information from that station I right-click in the other DI window to continue
CQing on the other radio. Upon entering (left-clicking) the information from
that station I immediately right-click in his DI window to confirm and log
(i.e. the contents of the F3 macro). The CQ transmission on the other radio
immediately stops when I left click in his DI window.
If you have stations calling on each radio then you follow the same procedure
as above. With some practice you will be able to interleave the messages so
that while you are receiving the information from one radio you will be sending
your information on the other radio.
To set up n1mm+ for this operation, you need to click on Config at the top of
the Entry window and then click on "Enter Sends Message (ESM mode)". Next you
click on the "Setup" button at the top-left of the DI window and click on "Rt
Click = Return NOT Menu".
Sam Leslie
w4pk@arrl.net
-----Original Message-----
From: Bostjan Voncina - S55O [mailto:bostjan.voncina@gmail.com]
Sent: Tuesday, August 25, 2015 1:55 AM
To: RTTY Reflector
Subject: [RTTY] N1MM so2r - sending the desired Fx on the other radio
immediately after the 1st msg
hi!
is there a way how to make n1mm+ send the desired msg on the other radio just
after the msg on radio 1 has finished sending its msg? without stopping the.msg
of radio 1 in the middle?
like cqing on radio 1 and in the middle of the cq pressing f2 for the exchange
on radio 2 that gets on the air immediately after the cq on radio
1 finishes?
like some kind of queue for sending.
i know it works for 1 radio..but it doesnt work for me with ctrlfx macros o
have i missed something?
i tryed.first win..second win but they are not ment to be used for this.
thank you
bostjan s55o
I tryed on n1mm reflector, but so far no hits :) please advise...
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|