I may have discovered why this odd display of MMTTY happened. I was using
the profile of "Fluttered Signals (FIR)" rather than "Standard RTTY". I had
been chasing some DX before and did not change the profile to "Standard".
Perhaps this is the reason. Only time will tell. WPX is coming.
73,
John W9ILY
> -----Original Message-----
> From: John Holmes [mailto:w9ily@comcast.net]
> Sent: Monday, January 9, 2017 4:03 PM
> To: 'rtty@contesting.com'
> Subject: MMTTY Strange display
>
> During the RTTY RU I encountered a strange display issue with MMTTY. This
> has never happened before so I wanted to see if anybody else ever
> experienced it.
>
> This generally occurred when decoding the text that I am sending. It
happens
> infrequently and at least once I observed it happening on call letters
that I am
> receiving from another station. I can check with 2Tone and Gritty and
their
> received text is correct, as expected. Here's what I'm seeing:
> When I an S&P I will send my call two times to call a station: W9ILY
W9ILY.
> However, sometimes the MMTTY display will show WL9IY W9ILY. The 4th
> character will appear after the initial W rather in the correct place. The
> second decoding of my call is always correct as far as I can remember.
>
> Anybody else see this?
> 73,
> John W9ILY
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|