RTTY
[Top] [All Lists]

[RTTY] NS RTTY this Thursday

To: "RTTY@contesting.com" <RTTY@contesting.com>, "cq-contest@contesting.com" <cq-contest@contesting.com>, NS <nccc-blue@kkn.net>
Subject: [RTTY] NS RTTY this Thursday
From: Ken K6MR <k6mr@outlook.com>
Date: Wed, 22 Mar 2017 08:07:28 +0000
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Greetings Diddlers:

Good group last week considering it was just after a Real Sprint.  Welcome back 
to Dick, KS0M who has been under the weather for a bit.

I listened around an hour early and didn’t hear a thing!   I’d like to think 
that’s because everyone is paying attention to these announcements, but….

I know this weekend is big for the microphone crowd, but if you’d like a bit of 
keyboard time please join us Thursday evening.  And yes, don’t forget about the 
new local time in your area.

Friday,  24 Mar 2017, 0145Z - 0215Z (Thursday 23 Mar 2017 in NA)
-- 1845 - 1915 PDT   (which is 1 hour later)
-- 2145 - 2215 EDT   (and this one too)
-- (others in-between those two)
-- 160: 1805 and up (Last two minutes seem to be popular…)
-- 80/40/20/15 +80kHz up from the band edge  (check 20 at the start just in 
case)
-- Same band dupes ok after 1 intervening Q.
-- 1 kHz QSY rule, otherwise standard Sprint rules
-- Mults per band
-- 100W power limit

Please visit http://www.ncccsprint.com/rttyns.html for complete rules and links 
to other info. If you find any problems with the web pages, please let me know 
so we can get them fixed.
If you would like to receive all the latest info about NS as well as a have a 
place for comments and questions, sign up for the NS mailing list:  
http://www.kkn.net/mailman/listinfo/nccc-blue

Report scores to 3830scores.com, and join us at 0300Z on 3610 kHz (+/- a few 
for ongoing groups) for comments and questions (and dinner menus).

Diddle diddle,

Ken K6MR


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>