>>> The 6300 is RATED for normal RTTY use at 100 watts by Flex, IIRC - don't
think any of the other 100 watt radios have this rating.
>>> Jerry W4UK
All Icoms do 100% duty cycle in RTTY, including 200W ones and the IC-PW1 1KW
solid state PA.
73,
Vlad VE3TM
--
At 01:21 AM 9/28/2017, Bill Turner wrote:
>------------ ORIGINAL MESSAGE ------------(may be snipped)
>
>On Wed, 27 Sep 2017 17:53:05 -0700, Mark wrote:
>
> >
> >Does it do 100 watts out on AFSK? One of the reasons I use an
> >interface and true FSK is to get 100 watts out of my 7600. AFSK would
> >limit to about 66 watts if everything is dialed in correctly.
>
>REPLY:
>
>Yes, the 6300 does full power on AFSK and all modes for that matter.
>
>Remember, when the 6300 is in RTTY mode, it's really AFSK but as I said
>before you can't tell the difference. In other words, there is no need
>to adjust audio drive level, etc. Just dial in the power you want and
>go.
>
>73, Bill W6WRT
>_______________________________________________
>RTTY mailing list
>RTTY@contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|