SD-User
[Top] [All Lists]

Re: [SD-User] Com port keying line

To: "G.W.Evans" <gw3wwn@onetel.net.uk>, sd-user@contesting.com
Subject: Re: [SD-User] Com port keying line
From: Darren G0TSM <sd@g0tsm.com>
Date: Fri, 26 Mar 2004 09:03:52 +0000
List-post: <mailto:sd-user@contesting.com>
Looks like it's a known 'feature' on ME

There is a fix for it....

http://support.microsoft.com/default.aspx?scid=kb;EN-US;q285894


Darren G0TSM




At 10:19 19/03/2004, you wrote:
Been using Win 98, no probs.  Now on Me, the Com port (pins 4 and 5),  is
enabled at
boot up, 8.4v appearing on the keying line, doesn't happen in safe mode, and
didn't happen on Win98.  Starting SD
clears the line and all is well, and stays that way when SD is unloaded.
But I have to disconnect the PC keying line to use the rig for general CW
working.
I know that this is not an SD problem, it's the PC, but I need the info from
somewhere. Thanks.
Wynne, GW3WWN
gw3wwn@onetel.net.uk



_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user

_______________________________________________ SD-User mailing list SD-User@contesting.com http://lists.contesting.com/mailman/listinfo/sd-user

<Prev in Thread] Current Thread [Next in Thread>