V11.05 21st October 2004
CQWW - SD.
SD now consistently identifies the correct zone, both
CQ and ITU, for any valid Russian callsign. In CQWW,
you can check the multiplier status of any zone by
entering it in the Callsign field.
For example, type 1 to see the status of Zone 1,
add 4 to see the status of Zone 14. Use Esc to
clear the callsign field.
SDV - Callsign Reference Files (.LST).
The record length has been restored to 50 characters.
It was reduced to 20 in the initial conversion to
Windows.
A reminder that, on a callsign match, SDV extracts
any locator (it can be anywhere in the reference
data) and places it in the Locator field on the
logging line.
Super Check Partial (SCP).
Due to recent broken code it worked only for the
first QSO logged. Fixed.
SCP may be toggled with the SCP command, or enabled
for the current QSO only with the equals (=) key.
Check Partial.
All SD loggers, by default, list callsigns (already
logged) needed on the current band and mode as you
enter prefixes.
You probably know that you can retrieve any such
callsign from the Check Partial window by using
the Arrow keys to select the wanted call and then
pressing enter.
Now, if there is a single wanted "check partial"
call corresponding to the prefix in the callsign
field, it is retrieved immediately you press Up
Arrow.
SDU - UBA Contest:
UBA.CTY updated, to include the new European Union
countries.
SD - Russian DX Contest.
RUSSIA.MLT updated to reflect the latest changes,
and SDCHECK updated to give a correctly formatted
Cabrillo log in this contest.
__________________________________________________________
The programs are freeware from www.ei5di.com. Please
keep a copy of whatever version(s) you're using now - as
insurance!
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|