> Message: 2
> Date: Fri, 11 Aug 2006 16:07:57 +0100
> From: "Paul O'Kane" <pokane@ei5di.com>
> Subject: [SD-User] WAE CW
> To: <sd-user@contesting.com>
> Message-ID: <001901c6bd58$1d9fee30$0201a8c0@paul>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> The WAE DX Contest takes place from 00:00 UTC on Saturday
> 12th to 23:59 UTC on Sunday 13th August. It's a CW-only
> event on the 5 contest bands from 10 to 80m.
>
> Rules at http://www.darc.de/referate/dx/xedcwr.htm
>
> SD supports this event. V13.07 runs on any Windows PC and
> is free from www.ei5di.com/sd/sdsetup.exe.
>
> DX entrants, outside EU, should get an updated SD.EXE from
> www.ei5di.com/sd/sdexe.zip, as it has some improvements for
> QTCs.
>
> Select SD's "WAE" template
>
> Europeans work non-Europeans and vice-versa. SD displays
> inappropriate callsigns or prefixes in red.
>
> Your score shown, while logging, reflects the correct
> weighting for multipliers on each band.
>
> SD supports QTCs for both sides of this contest. To see how
> it all works, set up a WAE test file, log a few QSOs and
> then enter the QTC command in the callsign field.
>
> Note: If, for example, W3LPL sends a QTC as 0905 DL1AA 215,
> you can log this, in SD, as 0905DL1AA215, followed by Enter.
> This is faster and simpler than entering the fields separately,
> but you may do that if you prefer.
>
No .. not at all!
Problem:
Logging w1aa
w1ab
w1ac getting 10 QTC's
trying (!) to get NOW next QTC's from w1aa ...
but SD will not
log them...meesageing ...got all QTC's!
This Problem only comes if *last call* in Log has full 10 QTC's
(sent)... so QTC-Collecting from station, worked before does not work!
I always had to take a "faked" Call to log! after that changing from
CALL in QTC-dialog and it was o.k.
73
Fred
dl5ym
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|