V14.08 12th August 2008
King of Spain Contest:
Fixed the scoring. Thanks G0FYX.
Updated the Cabrillo option in SDCHECK - it no
longer asks the question "Log Serial Rcvd".
The "correct" answer is "N" and it's now hard-
coded. Thanks G4RCG.
SDI - IOTA Contest - Callsign Edits.
Callsign edits, before logging a QSO, did not take
effect when the callsign length was unchanged.
There was no problem when characters were added or
deleted. Fixed. This applied also to SDU, SDC
and SDX. Thanks G4WJS & G3KZR.
Edits on previously logged QSOs did not take effect
until another QSO was logged. Fixed. Thanks G3PJT.
IOTA references corresponding to callsigns which
had been deleted were sometimes carried over to
the next QSO. Fixed. Thanks G4BJM.
SDIOTA.CTY: Added Shetlands as a separate call
area. Thanks MM0XAU.
SDICHECK:
Edits done using the Edit option updated on screen
but did not always update on file. Fixed. Thanks
EI7GY.
EU HF Championship.
Some EU calls were not scored. Fixed by updating
the list of EU prefixes in EUHFC.MLT.
RSGB 80m Sprint.
SDCHECK updated to add Section, LOW or QRP, when
creating the Cabrillo log.
SDV - District Multipliers.
Broken code meant that only the RSGB.MLV district
code file could be selected. Fixed.
WAE:
Restored the CW message "R" when logging QTCs with
WinKey. Thanks DL5YM.
Fixed delays in logging CW QTCs when no keyer port
was enabled. Thanks G3ZRJ.
CW Keying:
Removed the ESM (Enter Sends Message) parameter
from SD.INI. ESM can be toggled easily with
apostrophe ('), or with the ESM command. If no
CW port has been enabled, apostrophe and ESM are
ignored.
WinKey: At startup, with no CW port enabled, WinKey
will be disabled, and must be enabled with the
WINKEY command, if relevant, once a port has been
enabled with the PORTS command. The STATUS command
shows relevant settings.
PORTS Command: The range of serial (COM) ports
directly supported is now 1 - 24. Use 51-54 for
LPT1 - LPT4. If you are currently using ports
9-12 for parallel port keying, you must update
these now.
___________________________________________________
SD is free from www.ei5di.com.
If you find bugs, please send details to sd-user
.at.contesting.com. Keep an older version of any
program you download as insurance.
I have not tested serial COM ports above 8. Let me
know if they don't work.
Some older versions are available from
www.ei5di.com/sd/vaults
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|