SD-User
[Top] [All Lists]

[SD-User] IC-7600 keying

To: sd-user@contesting.com
Subject: [SD-User] IC-7600 keying
From: HansK <zs6kr@wbs.co.za>
Date: Fri, 06 Nov 2009 21:32:41 +0200
List-post: <sd-user@contesting.com">mailto:sd-user@contesting.com>
I just cannot figure out how to get the CW keying to work on my IC7600.
Rig control is OK via the USB port.
(the IC-7600 USB driver chose com8 after installation - info found in 
Device Manager)
There is no PTT but the screen shows that keying is taking place.
Assigning com8 as a shared port does not work as it accepts it as a CW 
port but deletes it as a control port.
Has anyone managed to control and key the rig  via the USB?

Any help will be appreciated
Hans ZS6KR
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user

<Prev in Thread] Current Thread [Next in Thread>
  • [SD-User] IC-7600 keying, HansK <=