----- Original Message -----
From: "Alex GM3ZBE" <alex@gm3zbe.plus.com>
> Is there a method in SD to control how DTR and RTS are asserted
> in a serial port?
With the exception of the SHARE command, there is no user control
for serial ports. When using WinKey, separate ports must be
selected (using the PORTS command) for keying and rig control.
With SHARE enabled (no WinKey), a single port supports keying,
PTT, and rig-control.
DTR - Keying
RTS - PTT
XMT - Rig Control
RCV - Rig Control
When using rig control, with SHARE disabled, DTR and RTS are
held high and may be used to power some level converters for
rig control.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|