[Top] [All Lists]

Re: [SD-User] Post event entry

To: <>
Subject: Re: [SD-User] Post event entry
From: "Roger Dixon" <>
Date: Fri, 9 Apr 2010 10:23:54 +0100
List-post: <">>
 Thanks for the help guys (both on and off list)

The situation:
V14.24 on the shack computer works fine (that solves the problem)
V14.13 on the other computer has the problem - motto don't use this version
on this computer !!

Roger - G4BVY

-----Original Message-----
From: [] 
Sent: 09 April 2010 09:55
Subject: Re: [SD-User] Post event entry


There was a version of SD that had a bug such that entering the hyphen
caused the date field to erase. I think it was back around V10. You might
just have this duff version.

73 Bob

>----Original Message----
>Date: 09/04/2010 9:34
>To: "Alex GM3ZBE"<>
>Cc: <>
>Subj: Re: [SD-User] Post event entry
>It must be me!!  Typing "09" is fine.  As soon as I type the "-" it
>the field !!
>-----Original Message-----
>From: Alex GM3ZBE []
>Sent: 09 April 2010 09:07
>To: Roger Dixon
>Subject: Re: [SD-User] Post event entry
>Works here!
>e.g enter 09-04-10 for todays date.
>Roger Dixon wrote:
>>  Guys
>> I have a memory that SD can be used to enter a log after the
event.  I 
>> even thought the command may be "POST".  This gets me to a screen
>> requires the date in DD-MM-YY format.  However, you cannot use the
>> character as this wipes the field.  Am I mis remembering or doing
>something stupid?
>> Roger - G4BVY
>> _______________________________________________
>> SD-User mailing list
>SD-User mailing list

SD-User mailing list

<Prev in Thread] Current Thread [Next in Thread>