V15.08 2nd June 2010
Rig Control - Change Mode.
With rig control enabled, the C and S commands
now change your rig's mode directly, but only
in contests which permit mixed mode.
In this context, the CWREVERSE command toggles
your rig's preferred CW "sideband" where Normal
indicates that the CW pitch increases, away
from zero beat, as you tune up the band, and
Reverse indicates that the CW pitch decreases,
towards zero beat as you increase frequency.
Your preferred setting (0-Normal, 1-Reverse)
is held in the SD_CWREV parameter in SD.INI.
NOTE: Some rigs do not support "reverse" CW
sideband. Check the CW Value 1 and 2 entries
in your .SD rig-control file.
Band Change after Edit.
After editing an earlier QSO, the current
band switched to that of the edited QSO.
Note: The Band Change after Edit bug can result
in logging QSOs on the wrong band. It's a very
good reason to use V15.08.
If you find any bugs, please post the details
to this mailing list. Also, please let me know
what you would like to see changed or added.
Older versions are available at
SD-User mailing list