SD-User
[Top] [All Lists]

[SD-User] V15.34 Released

To: "sd-user@contesting.com" <sd-user@contesting.com>
Subject: [SD-User] V15.34 Released
From: Paul O'Kane <pokane@ei5di.com>
Date: Tue, 01 Mar 2011 10:35:39 +0000
List-post: <sd-user@contesting.com">mailto:sd-user@contesting.com>
V15.34         1st  March 2011

Check Partial:
     Now shows all callsigns containing the partial
     call, regardless of position within the call.
     Previously, only matches on prefix were shown.

     Check Partial by suffix, using full stop, is
     still available, but is effectively redundant.

     In ARRL DX, check partial did not work for
     calls beginning with a valid state or province
     abbreviation, such as AB or NY. Fixed - thanks
     GM4SID.

Logs not loading:
     Logs for events with no 160m, such as UBA and
     BERU, would not load when the most recent band
     used in a previous contest was 160m.  Fixed.

WIA (John Moyle) Field Day.
     Added templates for the CW, and the Phone/Mixed
     sections.

REF Contest:
     The TK prefix (Corsica) was missing from the
     REF.MLT file.  Thanks WB3BSA.

AUTOFILL COMMAND:
     With S&P mode in ESM, and with the cursor in
     the exchange field, your own call is sent only
     when the field is empty.  The AUTOFILL command
     prevented SD from pre-filling the exchange
     field.

     This command has been broken for some time and
     is now discontinued.  Use F5 to send your own
     call, in S&P mode, when the exchange field is
     not empty.

_______________________________________________


If you find bugs in V15.34, please post full
details to this mailing list.  Older versions
are not supported, so you should first confirm
that the problem exists in V15.34.

Please let me know what you would like to see
changed or added.

Some older versions are available at
http://www.ei5di.com/sd/vaults

73,
Paul EI5DI







_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user

<Prev in Thread] Current Thread [Next in Thread>