Windows XP Pro SP3
Ten-Tec Omni VII
Rig control is set for the O7, PRIORITY is set to 1, initial QTH and
miscellaneous setup for SS is done. MSG1-MSG8 were left at their default
setting. CW keying (via the parallel port) is working correctly.
1. The message function keys (F1-F8) do nothing, although the display
blinks briefly. This is a killer - the rest are simply annoying.
2. Band change function keys F11 & F12 change the band displayed to the
left of the entry line, but do not change the rig's frequency.
3. After two or more presses of F11 or F12, SD hangs.
4. Direct frequency entry (14234.56) doesn't do anything
5. Band change via Bnn changes the band displayed to the left of the
entry field, displays the assumed new frequency below it (in red) but
doesn't actually change the rig's frequency. SD is hung afterward.
--
Bert Hyman W0RSB St. Paul, MN bert@iphouse.com
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|