V16.13 1st March 2013
COM Ports for WinKey & Rig Control:
Port numbers of 10 or greater are reliably
supported.
Rig-Control:
Improved support for older Yaesu rigs, in
particular FT1000MP, FT817 FT847 and FT897.
Restored SO2R support - enabled or disabled
with the 2R command, followed by PORTS to
assign COM ports and names for the two rigs.
Toggle between them with the backslash "\"
key.
With the callsign field empty, equals "="
sets the inactive rig to the same frequency
as the active rig. Comma "," swaps
frequencies. The active rig is indicated
by R1 or R2 at either side of the date/time
field.
In mixed-mode events, the mode on the
active rig will correspond to the frequency.
If necessary, use the S (SSB) or C (CW)
commands to switch. The X (eXchange)
command lets you switch sidebands on both
SSB and CW. The CW setting is held for
both rigs across all bands.
B40, B20 etc, and their equivalents 40M and
20M, switch the active rig to the new band -
this may also be done by direct frequency
entry, for example 14020 or 14183.56.
Commonwealth/BERU Contest:
Restored as a free and unrestricted option.
___________________________________________
If you find bugs in V16.13, please send me full
details - to pokane at ei5di dot com. Older
versions are not supported, so please confirm
that the problem exists in 16.13.
Please let me know what you would like to see
changed or added - whether features or new
contests.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|