Hello everbody,
I have used SD log for my first test ? the Norwegian Fylkestest 2014. I used
it in Post logging mode and punched all QSO?s in after the test. SD have a
setup file for the test: (NRRL fylkestest2014.tpl) and I believed that all
setup necessary was set there. But when I tried to print out the Cabrillo
log I saw that the multipliers was not handled correct. The test have four
test periods (time slots) and most of the QSO?s in period 2 to 4 was
marked as Dupes. I read the manual about the SETDUPE, but do not understand
how to use that after the log is punched in. Please help!
I also have another problem: I had typed the band wrong on one QSO and tried
to correct it in SD, but I could not reach the band coulomb. Then I tied to
correct it in the text file *.all, but when I tried SD again the band was
still wrong! Please help!
Best regards
LA2OJ
Sverre Johannessen
Tlf: +47 913 47 508
Strømsveien 40,
3186 Horten.
Email: sverrjo4@gmail.com
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|