SD-User
[Top] [All Lists]

Re: [SD-User] Yaesu FT-100 CAT with SD

Subject: Re: [SD-User] Yaesu FT-100 CAT with SD
From: William Sefton via SD-User <sd-user@contesting.com>
Reply-to: William Sefton <g7pvz@btinternet.com>
Date: Wed, 10 Oct 2018 18:28:53 +0100
List-post: <mailto:sd-user@contesting.com>
Hi,

I'm having a similar issue with my FT817ND and SCU17 combination.

SD displays the correct frequency until I move to 20 meters, then it multiplies 
by ten the frequency…..(14MHz becomes 140MHz and so on…)

If I plug in the IC703, then no issues at all…… 

Have played with different port settings, baud rates etc….still the same

Any other logger beit windows or Mac plays nice…but none are as good as SD (in 
my opinion)

Any ideas ?????

Bill, G7PVZ
On 10 Oct 2018, at 16:23, g3wyw via SD-User wrote:

> Allan,
> Wow FT100 a blast from the past.
> Have you tried 021.925 or 021925 for 15m
> I'll have a look at the CAT commands.
> 73 Paul G3WYW 
> 
> 
> 
> Sent from my Samsung Galaxy smartphone.
> -------- Original message --------From: Allan G Duncan 
> <allan.duncan@allanduncan.co.uk> Date: 10/10/2018  16:00  (GMT+00:00) To: 
> sd-user@contesting.com Subject: [SD-User] Yaesu FT-100 CAT with SD 
> I am having issues with SD V20.10 while connected to my Yaesu FT-100 (it is
> a backup radio for me). I had not tried this transceiver on previous
> versions, so I am unsure if it is a new problem.
> 
> 
> 
> Radio is connected to COM3 using a USB/Serial adapter with FTDI chipset.
> This cable and comport allocation works OK on my K3 with SD.
> 
> 
> 
> It will initially read the radio frequency OK (say 3522 KHz). Changing band
> with either SD or on the radio itself - it will go to strange frequencies -
> note that the FT-100 covers 1.8MHz to 440MHz.
> 
> 
> 
> Typing "28025" into the call field puts the radio on 280.250MHz. Typing
> "14195" puts the radio on 141.950MHz. Typing "15M" puts the radio on
> 212.100MHz.
> 
> 
> 
> Unfortunately, this makes the FT-100 in combination with SD only usable in a
> single band contest.
> 
> 
> 
> Is there something I am doing incorrectly?
> 
> 
> 
> Regards,
> 
> 
> 
> Allan
> 
> GM4ZUK
> 
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user

_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user

<Prev in Thread] Current Thread [Next in Thread>