V21.19 21 January 2019
Rig Control:
If rig control is disabled or interrupted a warning message
now replaces the frequency display. Previously, the display
was simply cleared and it was not always obvious that rig
control had been lost.
The warning message is replaced by the rig's frequency when
rig control is restored.
Added safeguards to ensure SD always logs on the band
matching the rig's frequency, subject to permitted bands
for the contest. This applies to both continuously-working
rig-control and to restoration of rig-control following an
interruption, regardless of any change in band in SD or on
the rig while rig control was interrupted.
To enable or re-enable rig control manually, use the PORTS
command. To disable rig control, set its port number to zero
(again with the PORTS command).
HA DX Contest - both sides:
Updated for current rules. Thanks PA0JNH & VK4TT.
_________________________________________
SD is free from www.ei5di.com
When installing a new version of SD, to replace an older
version, take care to "untick" the box corresponding to
"Create a desktop icon". Otherwise you will have to resize
SD's window, and set other parameters described in GETTING
STARTED on page 3 of the manual SD.PDF.
If you find bugs, send the details to sd-user (at)
contesting.com
Earlier versions of SD are not supported, so please
confirm that any problem still exists in V21.19.
If you enjoy using SD, please consider adding a few
comments at https://www.eham.net/reviews/detail/522-
follow the "write your own review" link. GW4BVJ kindly
did this in September 2019. You'll need an eham or
contesting.com login to submit your comments.
Just do it - please.
Thanks & 73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|