I have three outlets wired in my shack for amps. Two are 240V 30 amp
outlets and one is 120V 40 amps.
I would like to save having to climb under the table to plug in a different
amp to one of the 240V outlets.
I have a Henry 2K that I now use on 17 and 12 (backup for 10) and an NCL2000
modified for Svetlana
4CX400's. I would like to know if its possible to have both plugged in
altho I will never turn on more than one at a time.
Wife won't let me wire any additional outlets are we are at 150A capacity
now. (major re-wire)
I looked in MacMaster-carr and Graybar catalogs but all the dual outlets are
120V not 240V. My plugs that I use
are three wire with one hot horizontal, one vertical, and a common round
plug for the common ground. I will change them out if necessary.
Anyone know of a solution????
73 Dave K4JRB
--
SECC on the Web: http://secc.contesting.com/
Submissions: secc@contesting.com
Administrative requests: secc-REQUEST@contesting.com
Problems: owner-secc@contesting.com
|