Unless I misunderstand what you are trying to do,
You can key your rig from inside a contest template by
typing TUNE in the callsign field. ESC to quit.
73,
Joe, aa4nn
On Thu, 15 Nov 2001 11:02:29 -0500 <n4uk@mindspring.com> writes:
> I have a technical question for those of you who are using NA or
> CT to send CW from a parallel port. Is there a way to have the
> program key up the rig without relying on VOX and the transmission
> of a character first to do this? I built parallel interfaces long
> ago that send cw from LPT but rely on VOX. THis is not good for the
> TR relays especially when an antenna relay system, lockout relays,
> etc are used that add delay to when the amplifier relays are finally
> keyed up. This causes the RF relays to occasionally be hot keyed
> which will eventually lead to relay failure. I need to have the rig
> and all relays keyed first and THEN the CW to be sent a few
> milliseconds later. Is anyone doing it this way????
> Ken , N4UK
>
> --
> SECC on the Web: http://secc.contesting.com/
> Submissions: secc@contesting.com
> Administrative requests: secc-REQUEST@contesting.com
> Problems: owner-secc@contesting.com
>
>
--
SECC on the Web: http://secc.contesting.com/
Submissions: secc@contesting.com
Administrative requests: secc-REQUEST@contesting.com
Problems: owner-secc@contesting.com
|