SECC
[Top] [All Lists]

[SECC] antenna work at NQ4I

Subject: [SECC] antenna work at NQ4I
From: NQ4I@compuserve.com (Rick Dougherty)
Date: Wed, 31 Jul 2002 22:47:10 -0400
I will attempt a 3rd antenna part...no has shown any interest in the
previous 2 attempts, with the exception of Gordon N4LR....a week from Sat I
will start some more antenna projects...sure could use some help.....so far
all the equipment is moved from the old shack to the new one....still need
5 more desks/tables to finish out the 11 stations...looking for more
computers and monitors too...the Rohn 55 tower going to 205 ft is now at 70
ft....the old R45 tower that had the 10m stack and the 80 m yagi is almost
completely disassembled...still have 2 towers with 10 yagis to take down
and move...still need to move the 80m yagi down the streeet too...I am
going
to put the 2 element back up at 200 ft for this season and that will give
me some time to work on the 3 element one and get the second 3 ready for
3/3 stack...I have 3 SB-220's that I aquired and they are at N4UQ's
undergoing mods for qsk etc...so far I have 9 amps for the station...also
have 6 radios FT-1000mp's .....there is a considerable amount of work left
to be done before Oct CQWW SSB and I have only limited time...if I don't
get some help, the station will not be on the air M-M....
de Rick

<Prev in Thread] Current Thread [Next in Thread>
  • [SECC] antenna work at NQ4I, Rick Dougherty <=