SECC
[Top] [All Lists]

[SECC] Kenwood TS-830S problem

Subject: [SECC] Kenwood TS-830S problem
From: w4an@CONTESTING.COM (Bill Fisher, W4AN)
Date: Fri, 6 Sep 2002 22:57:28 -0400 (EDT)
I have 3 of them and none of them display this problem.  FWIW.

73

Bill

On Fri, 6 Sep 2002, Jeffrey Clarke wrote:

> 
>  Wonder if anyone out there is still using a Kenwood TS830S ?
> 
>  I use mine for my 2nd radio when I do SO2R. I haven't used it for
> about a year since I didn't have a station set up. I am now putting a
> small station back together since we recently moved into a place where
> I can have antennas again.
> 
> I am experiencing the following symptoms :
> 
> When I first turn on the radio it seems like the receiver is almost
> dead. The CW Calibrator has no reading/or very low on the S meter.
> If you let the radio "warm up" for about 5 minutes or so the receiver
> starts to return to normal and the S meter readings seem to be OK. I
> have adjusted the ANT and MIX coils per the instructions in the manual
> but this has not resolved my problem. Maybe I need a new driver tube
> -12BY7A ???
> 
>  Anyone ever remember having this problem ???
> 
>                73's Jeff KU8E
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Finance - Get real-time stock quotes
> http://finance.yahoo.com
> _______________________________________________
> SECC mailing list
> SECC@contesting.com
> http://lists.contesting.com/mailman/listinfo/secc
> 


<Prev in Thread] Current Thread [Next in Thread>