Jay,
I guess if it radiates, then I can find some structure to throw a fishin'
line over. Dunwoody's a hop, skip and jump from Marietta. What time?
Earlier the better if I'm going to get it up and accepting RF. Thanks for
the offer. According to the Web site yours must be the DX-CC version.
Jim
-----Original Message-----
From: Jay Pryor [mailto:jpryor@arches.uga.edu]
Sent: Friday, November 15, 2002 11:34 AM
To: james.nail@earthlink.net
Subject: RE: [SECC] Kenwood Repair
Jim,
Do you want to borrow my Alpha Delta DXCC antenna? I have one I will be
happy to loan you. I have been pleasantly surprised at its
performance. It's multi-band, covering 10 through 80M. It's 82 feet
long. I live in Dunwoody and will be home Saturday morning and Sunday
afternoon if you wanted to come by to pick it up.
Here's the Alpha Delta info: http://www.alphadeltacom.com/pg1.htm
73,
Jay, K4OGG
At 11:18 AM 11/15/2002, you wrote:
>John,
>
>Thanks. I just spoke to Paul. I'm going to drop it off on Monday after SS
>SSB this weekend. He said maybe he could have it done for the following
>weekend, but no promises. I guess worst case I could use an external keyer
>(I think I have an old AEA model packed away) if he can't get it fixed by
>CQWW CW contest time. I remember the QSO at W4AN. I worked you
backscatter
>with this R5 vertical, but it's all I have right now. I don't have
anything
>for 40. I guess I could go to HRO to buy a dipole. I've 100' trees that
>would support any direction, which would you suggest - NW? I'd hate to go
>North and possible miss the western reaches. I have not put in a serious
>(1000+) CW effort in quite some time. There was a minute during SS CW I
>could feel the excitement of the escalating Q rate! I have not used CT
>software, but am now working with the N1MM software which is very easy to
>use. Any comments you have on the dipole are greatly appreciated.
>
>Thanks,
>
>Jim WA2MBP
>
>-----Original Message-----
>From: John Laney [mailto:k4bai@worldnet.att.net]
>Sent: Friday, November 15, 2002 10:45 AM
>To: james.nail@earthlink.net
>Subject: Re: [SECC] Kenwood Repair
>
>
>Hi Jim: I send all my radios to W6XA for repair. I don't have a
>Kenwood right now, but he has repaired Yaesu and Icom rigs for me and I
>am sure he can do Kenwood. He works out of a shop under his house just
>off I185 on the east side. His name is Paul Hansen and his number is
>(770) 939-1320. You can find his e-mail address on QRZ.COM. Hope you
>get some rig working for this weekend and the next. Thanks for the QSO
>in ARRL SS CW. I was guest op at W4AN.
>
>73,
>
>John, K4BAI.
>
>
>_______________________________________________
>SECC mailing list
>SECC@contesting.com
>http://lists.contesting.com/mailman/listinfo/secc
|