Addendum: 4 comm ports, 2 LPT ports. All check good on loop back
tests.(LPT2 is disabled ) No IRQ conflicts on any. INI files has
CW_ON_PIN1=1, but that line is in the "config section"
K4SB wrote:
>
> Fellows, somehow, and it probably is related to the HD problems I have
> had on the shack computer, I am completely unable to generate CW,
> which is going to be a problem in the NAQP in a couple of days.
>
> I have a dual boot 98 SE and XP on that machine, but prefer the 98SE.
>
> I have tried using a comm port, setting the "Ports" section to Comm2,
> no poll, PTT "No" "PC generates", and "cw on LPT or comm RTS". OMNI is
> disconnected.
>
> I made a temp cable which I can plug into comm 2, and connect a VTVM
> to ground and RTS or DTR. I get absolutely no voltage change when
> pressing the message keys.
>
> HELP!
>
> 73
> Ed
> _______________________________________________
> SECC mailing list
> SECC@contesting.com
> http://lists.contesting.com/mailman/listinfo/secc
|