[SECC] Heil HC-4 and Yaesu FT-920

[rhackler at mindspring.com (Roger Hackler)]

Hey gang:

Has anyone had a problem with the FT-920's audio being too hot when using a
HC-4 element?  With the processor off and the Mic Gain cut way back, and the
ALC looking ok on the meter, I keep getting comments that the audio is being
overdriven?

Just curious if anyone has had a similar experience, and what they did.
Maybe a 100 ohm resistor in line with the element?

73 de KN6RO

Roger