Now, this is something I was wqaiting on someone to come up with. I have a
similar problem but it is in feeding the LINE OUT from the computer to the
mike input on my Drake T-4XC. Any thoughts on this one, Scott?
----- Original Message -----
From: <ku8e at bellsouth.net>
To: <secc at contesting.com>
Sent: Tuesday, November 14, 2006 7:48 PM
Subject: [SECC] N1MM Sound Card Interface
>I am trying to make a interface to use N1MM with my soundcard as a DVK. I
>have recorded some .WAV files using the sound recorder on Windows XP.
>Hooked the speaker of the computer to mic input of my IC756PRO but audio is
>badly distrorted when I run any power at all. I understand I need some type
>of isolation transformer.
>
> I am using N1MM in the '1 - Single Card - One radio, No Sound Card SO2R
> mode. I have a 1:1 isolation transformer from Radio Shack but not sure how
> to hook it up. There is a red/black/yellow/white wire coming out of the
> transformer. I think the mic is 600ohms input on the radio. Any help/tips
> would be appreciated. Thanks.
>
> Jeff KU8E
> _______________________________________________
> SECC mailing list
> SECC at contesting.com
> http://lists.contesting.com/mailman/listinfo/secc
>
|